MODEL 673Wet Sponge 67.5V 1-20 Mils (0 – 500 μm) for Paints and Epoxy Paint Coatings

The Model 673 Wet Sponge Holiday Detector for Plant or Stationary Operations is highly sensitive and accurate. A uniform coating of only one mil of paint or other non-conductive material over a metal surface is sufficient to repel a small current flow. If a pin-hole holiday is encountered, moisture from the sponge will seep into the hole and create a free path for electrical flow, activating the signal horn.

For coatings 1 to 10 mils thick, ordinary tap water can be used to wet the sponge. For coatings of 11 to 20 mils thickness, a non-sudsing wetting agent (such as Kodak Photo-flow R®) is recommended to increase ability of the moisture to swiftly make its way through the pin-holes.

Convenient output plugs on rear of unit allow use of customer supplied external signal systems such as lamps, Klaxon horns, recorders, etc. Output from these plugs is 120 volt A.C.

Model 673
Price: Contact us for a Quote or to be connected to a local Distributor in your area (713-681-5837 or sales@spyinspect.com)
Weight: 6 lb (2.7 kg)